Wednesday, 21 March 2012

CBSE-Class 9 - Science - Ch1- Matter In Our Surroundings- Short Q & A #class9-chemistry #eduvictors

Matter In Our Surroundings

CBSE-Class 9 - Science - Ch1- Matter In Our Surroundings- Short Q & A

Q1: Define matter.

Answer: Anything that occupies space and has mass is known as matter.

Q2: What are the characteristics of matter?

  • A large number of particles together constitute matter.
  • These particles are of very small size.
  • Particles of matter have spaces among them.
  • Particles of matter are in continuous motion i.e. they possess kinetic energy.
  • Particles of matter attract each other i.e. interparticle forces of attraction or intermolecular forces.
Q3: How matter is classified in terms of physical state?

Answer: solid, liquid and gas.

Q4: How matter is classified in terms of composition?

Answer: element, compound and mixture.

Q5: What are different physical states of matter? Name their properties as well?


Q6: Name matter classification in terms of composition.

Q7: Define Density.

Answer: The mass per unit volume is called density. Its SI unit is Kgm-3.

Q8. What do you mean by the term Volume?

Answer: The space occupied by a substance is known as volume.

Q9: What do you mean by the following terms:
          a. Evaporation
          b. Sublimation
          c. Condensation

a. The process of liquid changes into vapours on heating even below its boiling point is known as evaporation.

b. Sublimation: The changing of the solid directly into vapours on heating and vapours into solid on cooling.

c. The process at which vapours changes into liquid is termed as condensation.

Q11. Define Latent Heat of Fusion and Latent Heat of vaporisation.

Answer: The latent heat of fusion of a substance is the quantity of heat required to convert one unit mass of the substance from solid state to the liquid state at its melting point without any change of temperature.

The quantity of heat required to convert one unit mass of a liquid into vapour at its boiling point without any change of temperature is called its latent heat of vaporisation.

[Another better definition provided by one of our read Mr Saheel Deshpande is as follows:]

Latent heat of vaporisation: It is the amount of heat consumed when 1 kg of liquid changes into vapour at constant temperature and pressure.

Q 12. Define the term Volatile Liquid.

Answer: Those liquids which can change into vapours easily are termed as volatile liquids.

Q 14. Define the following terms:
          a. Melting point
          b. Freezing point
          c. Boiling point

a. The temperature at which solid changes into liquid is called its melting point.
b. The temperature at which liquid changes into solid.
c. The temperature at which liquid changes into vapours is termed as its boiling point.

Q 15. (NCERT) Which of the following is matter?
Chair, Air, Love, Smell, Hate, Almonds, Thought, Cold, Cold drinks, Smell of  perfume

Answer: Anything which occupies space, mass and can be felt by human senses are called matter. So the things from the above list which are matter are:
  1. Chair, 
  2. Air, 
  3. Almonds, 
  4. Cold drink 
  5. and Smell of a perfume (It is also considered in the matter because it is due to the presence of some volatile substance in air).
Objects which are not considered 'matter' from the above list are Love, hate, Smell, Thought and Cold.
(Note: Please see question 55. If you consider smell as sensation then it is not a matter. But the smell of something e.g. smell of perfume or flower is due to the presence of gaseous matter. For example, ammonia has a pungent smell and its smell is one of the ways to detect the presence of ammonia.)

Q 16 (NCERT) Give reasons for the following observations. The smell of hot sizzling food reaches you several meters away, but to get the smell from the cold food you have to go close.

Answer: Particles present in the matter possess kinetic energy and therefore move constantly. At lower temperature, particles have low kinetic energy and thus move slowly. But as soon as the temperature rises, these particles move faster than when they were in cold. As the particles of hot vapours coming out of hot sizzling food move faster, they can reach several meters away. The particles in the cold food move slowly and thus do not reach us when we are away even a few meters. Therefore we have to go closer to smell cold food.

Q17: Why do gases diffuse rapidly?

Answer: The gases diffuse rapidly because the particles in the gases can freely move in all directions and there is a lot of intermolecular space in gases.

Q18:(NCERT) The mass per unit volume of a substance is called density (density=mass/volume). Arrange the following in order of increasing density:
                      Air, Exhaust from chimneys, Honey, Water, Chalk, Cotton and Iron.

Answer: The order in increasing density is:
  • Air
  • Exhaust from chimneys
  • Cotton
  • Water
  • Honey
  • Chalk
  • Iron

Q19: Define evaporation.

Answer: Evaporation is a physical process in which a liquid changes to its gaseous state, at a temperature lower than its boiling point.

Q20: Explain compressibility in gases with an example?

Answer: Liquefied petroleum gas (LPG) cylinders are used in our homes for cooking, contains gases in the compressed state. Similarly, compressed natural gas (CNG) is used as a fuel in vehicles. Large volumes of gases can be compressed in small cylinders and are transported to distant places.

Q21: What is SI unit of temperature? Give mathematical relation also.

Answer: SI unit of temperature is Kelvin. T (K)= T (°C) +273

Q22: Convert the following temperature to Celsius scale:
(a) 300 K 
(b) 573 K

Answer: (a) 300K = 300 - 273 = 27 °C
(b) 573 K = 573 - 273 = 300 °C

Q23: Draw a diagram to show interconversion among states of matter.

Q24: Define transpiration.

Answer: The process of evaporation of water from the aerial parts of plants especially in leaves is called transpiration.

Q25: Which state of matter is most easily compressible?

Answer: the Gaseous state.

Q26: After rains when do raindrops dry away easily– on a cloudy day or on a sunny day? State reason also.

Answer: Rain drops will dry easily on a sunny day. As the temperature is higher on a sunny day, evaporation increases. On a cloudy day temperature of the surrounding is low due to humidity while on a sunny day the temperature of the surrounding is high. With an increase in temperature, number of particles get the more kinetic energy to vaporize.

Q27(NCERT): A diver is able to cut through water in a swimming pool. Which property of matter does this observation show?

Answer:  The forces of attraction among the particles of water hold it together. But these forces are not too strong. The force applied by the diver is enough to overcome these forces of attraction. The observation shows the following properties of matter:
  • Intermolecular forces in water are not very strong.
  • Particles in liquids can be easily displaced from their original position.
  • Liquids show reasonable fluidity.

Q28: Arrange the following substances in increasing order of intermolecular force of attraction:
         water, sugar, oxygen

Answer: Oxygen < Water < Sugar

Q29: Our own bodies contain examples of all three states of matter. Can you identify these?
  • Solid: Teeth, bones
  • Liquid: blood
  • Gas: air (oxygen and carbon dioxide) that we breathe in-out through lungs.

Q30: What is the physical state of water at the following temperatures?
(a) 25 °C
(b) 0 °C
(c) 100 °C

(a) 25 °C: liquid
(b) 0 °C: solid or liquid (if melting process is on way).
(c) 100 °C: gas or liquid (if the boiling process is on way).

Q31: What do you mean by change in state?

Answer: Change of substance from one physical state to another is called the change of state.
E.g. conversion of ice into liquid water is a change of state from solid(ice) to liquid (water).

Q32: (NCERT) Give reasons to justify:
(a) Water at room temperature is a liquid.
(b) An iron almirah is solid.

(a) Water is a liquid at room temperature:
  1. In water, the intermolecular forces are strong enough to keep its particles bound to each other.
  2. The melting point of water is below room temperature(so it does not convert into ice).
  3. Its boiling point is above room temperature (therefore it does not vaporise completely).
(b) An iron almirah is solid
  1. It has fixed shape and definite volume because of strong molecular cohesive forces.
  2. It is rigid and cannot be deformed easily because of strong molecular forces.
Q33: Why do diffusion become faster at higher temperatures?

Answer: The speed of particles in any form of matter increases with the rise in temperature. Hence the reason.

Q34: How can matter change its state?

Answer: The physical state of any matter can be brought about in the following ways:
  • by changing temperature only
  • by changing pressure only
  • by changing pressure and temperature both.

Q35: Define boiling. Why boiling is considered as a bulk phenomenon?

Answer: Rapid formation and breaking of bubbles in the bulk of a liquid being heated is called boiling.

During boiling particles from the bulk of liquid gain enough energy to get converted to vapour. Therefore it is a bulk phenomenon.

Q36(CBSE): Why does the temperature of a substance remain constant during melting and boiling even when heat is being supplied to it continuously?

Answer:  It is because the heat supplied to the substance is used up (or absorbed) in overcoming the intermolecular forces, and therefore, it does not show up as a rise in the temperature.

The following figure shows melting of ice and its vapourisation at 0° C and 100° C respectively.

Q37: Convert the following temperatures:
a. -78.0 °C to Kelvins
b. 775 K to °C
c. 489 K to °C
d. 24 °C to kelvins

Answer: (a) 195 K (b) 502 °C (c) 216 °C (d) 297 K

Q38: Explain with an experiment to show gases do not have fixed shape or volume.


Experiment: To show gases do not have fixed shape or volume.

  1. Take two balloons of different shapes. For example, One round and one heart-shaped or cylindrical.
  2. Fill the balloons with air.
Observation: Air takes up the shape of a balloon.

Conclusion: This shows air has no definite shape or volume. It takes up the shape of the balloon.

Q39: What is evaporation? Why does evaporation cause cooling?

Answer: The process by which a liquid change into its vapour state at temperatures below the boiling point is called evaporation.

Evaporation is an endothermic process i.e. liquid absorbs heat during evaporation. This heat may be provided either by the surroundings or by liquid itself.

When the evaporating liquid takes the required heat from other parts of the liquid, the rest of the liquid cools down. On the other hand, if the liquid takes heat from the surroundings, it causes cooling of the surroundings.

E.g. on a hot day (sunny day), we perspire. When this sweat evaporates, it absorbs the required heat from our body, and we feel cool.

Q40: What causes evaporation?
Explain evaporation and its cooling effect in terms of kinetic energy of particles.

Answer: During evaporation, the molecules which possess higher kinetic energy leave the liquid and go into space above the liquid as vapours. The remaining molecules possessing lower kinetic energy are left in the liquid state. Consequently, the average kinetic energy decreases which result in the fall of temperature of the liquid.

Q41: What are the differences between boiling and evaporation?

1It occurs at a specific temperature.It occurs at all temperatures.
2It requires heat energy to be supplied by external sources.In general, liquid absorbs heat energy from its surroundings.
3It takes place throughout the liquid.It is a surface phenomenon and occurs only at the surface of the liquid.
4It is not accompanied by cooling. The temperature of the liquid has increased.In this process, the region surrounding the evaporating liquid gets cooler.
5It is a rapid and noisy process.It is a slow and quiet process.
6Temperature of the liquid remains constant at the boiling point.Usually the temperature of liquid drops.

Q42: What factors affect the rate of evaporation?

Answer: Factors that affect the rate of evaporation are:
  • the surface area exposed to atmosphere i.e. it increases with an increase in surface area.
  • temperature. Evaporation increases with increase in temperature.
  • humidity. Evaporation decreases with an increase in humidity.
  • wind speed. Evaporation increases with an increase in wind speed.

Q43: In which case evaporation of water will be faster i.e. near the sea or far away from the sea.

Answer: The region nearby sea will be more humid. Since evaporation decreases with an increase in humidity. Therefore, evaporation will be faster in an area far away from the sea.

Q44: Which of the following state does not exist at room temperature conditions:
a) Solids
b) Liquids
c) Gas
d) Plasma

Answer: d) plasma

Q45: Why solids cannot be compressed like gases?

Answer: The particles in solids are so tightly packed that there are no or little interparticle spaces left among them. Therefore solids are not compressible like gases. Gases which have large inter-particle spaces are therefore compressible.

Q46: Why is ice at 273 K more effective in cooling than water at the same temperature?Answer: Ice at 273K or 0 C can absorb a large amount of heat energy as latent heat of fusion to get converted to water state. Therefore Ice at 273K is more effective in cooling.

Q47: List any five physical properties of liquids.

  1. Liquids do not have fixed shape or boundaries.
  2. They have fixed volume.
  3. They exhibit fluidity i.e. they can flow.
  4. Less compressible as compared to gases but higher than solids.
  5. Lower density as compared to solids.
  6. Compared to solids, liquids have higher kinetic energy but less than gases.
  7. The intermolecular forces of attraction are weaker than that of solids.
  8. Show the property of intermixing i.e. can diffuse.

Q48: Differences among solids, liquids and gases.


Property        SolidsLiquids             Gases
MassDefinite mass         Definite massDefinite Mass
ShapeDefinite shapeNo definite shapeNo definite shape
VolumeDefinite VolumeDefinite VolumeNo Definite Volume
DensityHighestLower than solids   
Higher than gases
RigidityHighly RigidLess Rigid than SolidsNot rigid
FluidityDo not flowFrom higher level to
low level
In all directions
CompressibilityVery Low or
Cannot be
compressed easily
LowVery High
Free SurfaceInfiniteOne (Upper Surface)No free surface
DiffusionCannot diffuseFew diffuse
Diffuse rapidly
Thermal ExpansionLow and LinearHigher than SolidsHighest
Packing of particlesTightly PackedLoosely PackedVery loosely packed
Spaces between particlesVery lessGreater space as
compared to solids
Forces of AttractionVery strongLess than solidsLeast
Kinetic Energy(KE)     Very low KEHigher than solidsHighest KE
Movement of ParticlesCannot move freely
Can move freely
Translatory & Rotatory 
Can move freely
Translatory & Rotatory
Filing a gas containerDo not require containerRequires containerRequires container

The States of Matter
Nice chart for FA assignment
States of Matter
(credits:James Childs )

Q49: Why is light not considered matter?

Answer: Matter occupies space and has mass. Light has neither of the two and that's why it is not considered as matter. It is taken as a form of energy and electromagnetic radiation.

Q50 Why does steam cause more severe burns than boiling water, though both are at the same temperature?

Answer: At 100°C, steam carries additional latent heat than boiling water. Therefore steam cause more severe burns.

Q51: What are the ways a gas can be liquefied?

Answer: Applying pressure and reducing temperature can liquefy gases.

Q52: What is a dry ice and what are its properties?

Answer: Solid carbon dioxide ( is known as dry ice. It is stored under high pressure. Solid
CO2 gets converted directly to gaseous state on the decrease of pressure to 1 atmosphere without coming into a liquid state (i.e. sublimes). This is the reason that solid carbon dioxide is also known as dry ice.
It is mainly used as a cooling agent because its temperature is very low than water-ice. Dry ice is commonly used in theatres and in movies to produce the effect of fog.

Q53: How vapour is different from gases? Give examples of each.

Answer: In general, those substances which are liquids at room temperature and turn into gas state due to evaporation are called vapours. While the substances which are in the gaseous state at room temperature are termed as 'gases'.
e.g.  Sulphur, camphor exhibit phase change and turn into vapours. While Carbon Dioxide (CO2), Oxygen (CO2), Nitrogen (N2), Helium (He) exist as gases at room temperatures.

Q54: How heat is transferred when a solid sublimes?

Answer: Certain solids like iodine, naphthalene, solid-CO2 sublimes on heating. Heat is absorbed by the molecules of these solids and is transferred to kinetic energy of molecules. Due to which the molecules show phase change into the gaseous state.

Q55: Is smell of garlic or perfume a matter?

Answer: Smell is a sensation. It is an ability of humans or animals how they perceive an odour. However, the origin or cause of the smell is a chemical (matter). e.g. The smell of garlic is due to the chemical, allicin.

Q56: The mass per unit volume of a substance is called density.(density = mass/volume). Arrange the following in order of increasing density – air, exhaust from chimneys, honey, water, chalk, cotton and iron.

Answer: Exhaust from chimneys, air, cotton, water, honey, chalk, and iron

Q57: Why do solids expand a bit on heating and contract a bit on cooling?

Answer: The solid molecules do not have sufficient inter-molecular (or interparticle) space thus it expands a bit on heating. The inter-particle forces of attraction are very strong which do not let solid particles to leave its mean position. Therefore solid contracts a bit on cooling.

Q58: Bromine particles are almost twice as heavy as chlorine particles. Which gas will diffuse faster? Explain your answer.

Answer: The rate of diffusion of a gas depends on its density. Light gases diffuse faster than heavy gases. Since bromine particles are twice as heavy as chlorine particles.

Q59: Why do you observe small drops of water on the outside surface of a tumbler containing crushed ice.

Answer: A large number of tiny drops of water appear on the outer surface of a steel tumbler containing crushed ice. The air around the tumbler contains water vapour in it. When these water vapours come in contact with the cold, outside surface of steel tumbler, they condense to form tiny drops of liquid water. So, the formation of drops of water on the outside surface shows the presence of water vapour in air.

Q60: What is plasma made up of? Does it occur naturally?

Answer: Plasma is a mixture of free electrons and ions. Plasma is considered the fourth state of matter. It occurs naturally in the stars (including the Sun).



  1. the defination of latent heat of fusion is wrong..i.e Q 11
    Please Correct it

    1. In Q11 the pressure is not specified... I think it should be specified as it is a factor in the change of state of matter
      Latent heat of vaporisation is the amount of heat required to convert 1kg of a liquid to its vapor at its boiling point at atmospheric pressure(1 atm) a constant temperature

  2. Q37 (a) is also wrong..take care

    1. Q11 answer is as follows:
      the heat required to convert a solid into liquid or vapour or a liquid into vapour without change in temperature.........

    2. Q11 answer is as follows:
      the heat required to convert a solid into liquid or vapour or a liquid into vapour without change in temperature.........

  3. Another mistake in Q 48 gases don't have definate volume...

  4. Good Job...You are a really intelligent guy....

  5. Q16 ans 1st line 'therefore' spelling error.

  6. some good questions missing..

  7. how to take printout of these notes

  8. Q 11 is wrong ,correct definition is

    latent heat of vaporisation : It is the amount of heat consumed when 1 kg of liquid changes into vapor at constant temperature.
    this is a correct definition.

  9. Im really interested in this Blog ! Admin can i be an author here ? :)

  10. This comment has been removed by the author.


  12. can you tell me the anwser of this question- arrange the following in order of incresing density - air,exhaust from chimneys,honey,water,chalk,cotton and iron ??

    1. it's not described that the air is hot or not caz if it's hot then it will be first cause hot air is lighter

  13. Ok! so admin please courier me 15gm or 5ml of smell of perfume ...
    If you can I bet you i will give you a billion rupees .......

  14. plz try to uplod pdf fles of these

  15. In ans32(a),2nd point,it should be freezing point of water instead of melting point.

  16. can u upload according to ncert .......

  17. This comment has been removed by the author.

  18. q 30 part b is wrong
    according to ncert fact box the melting point of water is 273.16 k that is 0.16'c thus it should be solid at 0 °C

  19. can anyone please give me the reason "water has more energy than ice in the room temperature.why

  20. Can you please explain through flowchart - latent heat of fusion and vapourization and why it is not reflected in thermometer?

  21. Gud job guys!!!!! Keep it up .....

  22. thank u guys u have helped me a lot.

  23. thank u guys u have helped me a lot.

  24. Namaste.. May I ask u a question? I felt a confusion while being asked it in the competitive exam.

    Question-- We get the smell of Food outside the house---
    (a) Gas (b) Evaporation (c) Boiling (d) vaporization

    I ticked an unduly answer of (c).. Is it right? IF not, Please gimme kindly one of the best answer.

    Thank you in advance..

  25. got a question fr you.Reason,even though the particles of solid are more tightly packed than liquids.why is the latent heat of vapourisation of water more than that of ice?

  26. how to take printout of these sollutions

    1. if u r doing from laptop then see there is a option on the top right click there n u will see print then click on print

    2. Press right click and then click on the option print and set the information to save this document on your desktop background Then attach this document on your printers default browser software on your computer and then print out

  27. give reasons-naphthalene balls disappear with time without leaving any solid

    1. naptha balls sublime at room temp. thus without leaving any solid.

  28. The questions are too easy...
    But helpful

  29. Q4 and q6 are repeated and if they r different q6's ans is not give....thank u

  30. This is very nice what is ur email I'd I want to donate 600$ it is very helpful for my son actually I am a billionaire and my son told me that this website is very please tell your email I'd......thank you😊

  31. In 32 no. a how liquid can be melted as it is already in melted ??

  32. How do I printout these questions??

  33. Q53 the chemical short form of oxygen is written as co2 instead of o2

  34. I don't understand Q.NO=24. PLease explain it.Thanku

  35. Spelling of vapour is wrong everywhere

  36. what is , at last, the answer for Q.55

  37. your questions r gud but why i am not able to select them

  38. what we have to do in qno 40 😦😦😨🙄🤗

  39. The question are very helpful in my half yearly exam


We love to hear your thoughts about this post!

Note: only a member of this blog may post a comment.